MODINE GULFCOAT CIRCUIT SHIELD PROTECTOR
Part#: IEA-OC-008
MODINE GULFCOAT TRANSCLEAR COIL COATING 1 GAL
Part#: WRA-OC-030
Offer the best protection available with GulfCoat® Corrosion Coating a unique and proprietary corrosion resistant coating that provides HVAC&R systems the highest level of protection against corrosion and other environmental factors and can withstand harsh environments, providing long-term protection.
It was developed in response to demand for a protective anti-corrosion coating that could be applied on small units or in remote areas.
GulfCoat® Corrosion Coatings are formulated to be corrosion resistance, with improved adhesion, moisture resistance, and UV protection thus providing protection for equipment that will enhance its ability to run efficiently throughout its life cycle.
GulfCoat Corrosion Coating provides coverage for 25 sq. ft. of coils (up to 3 rows) or 350 sq. ft of surface coverage (cabinet) per gallon. Results vary depending on user’s spray technique.
• Easy to apply on-site or at your premises
• Use recommended Spray Gun for best application
• Provides UV resistance
• Provides effective moisture barrier
• Contain low VOC’s
• Provides for easy maintenance
• Reduces major maintenance and replacement costs
• Non-ozone depleting chemical Low Toxicity
• Flexibility for improved air flow
• Low Toxicity
• store in the original closed container in a cool, dry place.
MODINE GULFCOAT CLEAR COIL COATING AEROSOL
Part#: IEA-OC006
Offer the best protection available with GulfCoat® Corrosion Coating a unique and proprietary coating that provides HVAC&R systems the highest level of protection against corrosion and other environmental factors, and can withstand harsh environments, providing long-term protection.
It was developed in response to demand for a protective anti-corrosion coating that could be applied on small units or in remote areas.
GulfCoat® Corrosion Coatings are formulated to be corrosion resistance, with improved adhesion, moisture resistance, and UV protection thus providing protection for equipment that will enhance its ability to run efficiently throughout its life cycle.
GulfCoat Corrosion Coating provides coverage for 6 to 8 SF of coil face area depending on user’s spray technique per aerosol can. One case contains 12 (12 oz) Aerosol Spray cans for 144oz total shipment.
• Easy to apply on-site or at your premises
• Flexibility for improved air flow
• Provides UV resistance
• Provides effective moisture barrier
• Provides for easy maintenance
• Reduces major maintenance and replacement cost
• Low Hazardous Air Pollutants (HAP’s) content
• Contain VOC exempt solvents for lower VOC emissions
• No CFC’s
MODINE GULFCOAT BLUE COIL COATING AEROSOL 12OZ IN12622-A
Offer the best protection available with GulfCoat® Corrosion Coating a unique and proprietary coating that provides HVAC&R systems the highest level of protection against corrosion and other environmental factors, and can withstand harsh environments, providing long-term protection.
It was developed in response to demand for a protective anti-corrosion coating that could be applied on small units or in remote areas.
GulfCoat® Corrosion Coatings are formulated to be corrosion resistance, with improved adhesion, moisture resistance, and UV protection thus providing protection for equipment that will enhance its ability to run efficiently throughout its life cycle.
GulfCoat Corrosion Coating provides coverage for 6 to 8 SF of coil face area depending on user’s spray technique per aerosol can. One case contains 12 (12 oz) Aerosol Spray cans for 144oz total shipment.
• Easy to apply on-site or at your premises
• Flexibility for improved air flow
• Provides UV resistance
• Provides effective moisture barrier
• Provides for easy maintenance
• Reduces major maintenance and replacement cost
• Low Hazardous Air Pollutants (HAP’s) content
• Contain VOC exempt solvents for lower VOC emissions
• No CFC’s
GULFCOAT WRA-OC-030 TRANSCLEAR COIL COATING 5 GAL (1 PAIL)
Offer the best protection available with GulfCoat® Corrosion Coating a unique and proprietary corrosion resistant coating that provides HVAC&R systems the highest level of protection against corrosion and other environmental factors and can withstand harsh environments, providing long-term protection.
It was developed in response to demand for a protective anti-corrosion coating that could be applied on small units or in remote areas.
GulfCoat® Corrosion Coatings are formulated to be corrosion resistance, with improved adhesion, moisture resistance, and UV protection thus providing protection for equipment that will enhance its ability to run efficiently throughout its life cycle.
• Easy to apply on-site or at your premises
• Use recommended Spray Gun for best application
• Provides UV resistance
• Provides effective moisture barrier
• Contain low VOC’s
• Provides for easy maintenance
• Reduces major maintenance and replacement costs
• Non-ozone depleting chemical Low Toxicity
• Flexibility for improved air flow
• Low Toxicity
• store in the original closed container in a cool, dry place.
HERESITE GRAY FINISH AIR-DRY WATER BASED COATING
Part#: WB-506
Heresite HereShield is a low-VOC direct to metal coating that was developed as a higher performing alternative to VR-514. It exhibits excellent corrosion resistance, UV resistance and weathering qualities, along with good adhesion to ferrous and non-ferrous metals without complex pretreatment or primers. HereShield offers excellent durability and salt fog performance. Additional benefits include good adhesion, good film building characteristics, and flexibility. This single component coating is typically applied on the internal and external surfaces of HVAC-R heat exchangers and related equipment. HereShield is specially formulated for marine/saltwater environments. It is splash resistant to a range of acids and inorganic salts.
Quantity: 1 Gallon.
RCD SEA FOAM GREEN UNIT MATCHED TOUCH-UP PAINT
Part# PH23QK016
PAINTHAX AMERICAN STERLING TOUCH UP PAINT
Part# 313974-751
- Easy Installation & Service: Designed for quick and hassle-free drop-in replacement.
- Optimal Performance: Meets exact design specifications for maximized system function.
- Proprietary Design: Exclusive specifications ensure unmatched compatibility and performance (details not publicly available).
- Top Quality: Rigorously tested for maximum reliability and long-lasting durability.
- Safety & Standards: Upholds all agency listings and adheres to safety regulations.
- Warranty Protection: Ensures your equipment warranty remains valid.
BLUE COIL GUARD 18 OZ AEROSOL
Item#: CGB-AER
- Creates a very durable protective coating that is fast drying for ease of use
- Offers excellent resistance to salt spray and chemical buildup
- Provides excellent resistance to weathering without discoloration
- The high dielectric formulation reduces risk of accidental electrical shorts
- No negative effect on heat transfer properties of the equipment
- No negative effect on heat transfer properties of the equipment
- Blue tinted product is used to ensure complete coverage.