Supco 4 'N 1, 1/12-1/5 HP Hard Start Kit
Part#: URCO810RC
110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, start and run capacitor. Used on refrigeration systems without run capacitors. Rated for 1/12 HP to 1/5 HP compressors. Maximum RLA 4.05 Amps. This kit includes a new run capacitor.
Features/Benefits
- Designed for modern high efficiency compressors
- Easy mount clip for quick installation
- Helps older compressors start and run cooler
- Ideal solution for replacing all four components in a system with a run capacitor
- Prevents low voltage starting problems
- Wire Designations - White/Start, Black/Common, Red/Run
Supco 4'N 1 1/3+ -1/2 HP Hard Start Kit
Part#: URCO210RC
110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, start and run capacitor. Used on refrigeration systems without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 13.3 Amps. This kit includes a new run capacitor.
Features/Benefits
- Designed for modern high efficiency compressors
- Easy mount clip for quick installation
- Helps older compressors start and run cooler
- Ideal solution for replacing all four components in a system with a run capacitor
- Prevents low voltage starting problems
- Wire Designations - White/Start, Black/Common, Red/Run
Supco Wire Hard Start Kit
Part#: 3W1
The 3-Series hard starts provide the service professional with an OEM option when the application calls for a hard start. Combining a potential relay and start capacitor the 3 series provides a TRUE 3 wire solution.
Features/Benefits
- Includes EZ snap bracket for quick installation
- Instant re-start
- Mechanical Potential Relay
- NATE® Recognized (Course #1867-0002)
- True 3-wire solution
- UL® Recognized
- Voltage sensing
Supco Ultra Start Series Hard Start Kit
Part#: MPR5
Hard Start Kit Mechanical Potential Relay (MPR) and Start Capacitor
Features/Benefits
- Can be used on PSC and CSIR type compressors
- Easy 2-wire installation
- Instant re-start
- Mechanical Potential Relay
- NATE® Recognized (Course #1867-0002)
- OEM approved technology
- UL® Recognized
- Voltage sensing
Supco Ultra Start Series Hard Start Kit
Part#: SPR1
Hard Start Kit Mechanical Potential Relay (MPR) and Start Capacitor, for use on 3.5 to 5 HP units
Features/Benefits
- Can be used on PSC and CSIR type compressors
- Easy 2-wire installation
- Instant re-start
- Mechanical Potential Relay
- NATE® Recognized (Course #1867-0002)
- OEM approved technology
- UL® Recognized
- Voltage sensing
Supco Ultra Start Series Hard Start Kit
Part#: SPR5
Hard Start Kit Mechanical Potential Relay (MPR) and Start Capacitor, for use on 1 to 3 HP units
Features/Benefits
- Can be used on PSC and CSIR type compressors
- Easy 2-wire installation
- Instant re-start
- Mechanical Potential Relay
- NATE® Recognized (Course #1867-0002)
- OEM approved technology
- UL® Recognized
- Voltage sensing
Supco Super Seven Hard Start Kit
Part#: SPP7S
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series
Features/Benefits
- Can be used on PSC type compressors
- Easy 2-wire installation
- Most economic
- NATE® Recognized (Course #1867-0002)
- PTC Positive Temperature Coefficient Relay and Capacitor
- UL® Recognized
Supco Super Boost Hard Start Kit
Model#: SPP6
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series
Features/Benefits
- Can be used on PSC type compressors
- Easy 2-wire installation
- Most economic
- NATE® Recognized (Course #1867-0002)
- PTC Positive Temperature Coefficient Relay and Capacitor
- UL® Recognized
Supco Drain Heater
Part#: SH500
All SUPCO® Drain and Door Heaters are designed for continuous use to protect drains from ice build up. All of these heaters cannot be cut, spliced, extended or altered in any way.
Features/Benefits
- Cannot be cut, spliced, extended, or altered in any way
- Durable metal braid
- Heater tip 7/16" diameter
- Silicone construction
- These heaters are water resistant only, not water proof.
- These heaters can get wet, but they cannot sit in water for any period of time.
SPP5 SUPER BOOST
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series
Features/Benefits
- Can be used on PSC type compressors
- Easy 2-wire installation
- Most economic
- NATE® Recognized (Course #1867-0002)
- PTC Positive Temperature Coefficient Relay and Capacitor
- UL® Recognized