Valves

Line Tap Valve 1/4" - 3/8", Part# Qtm-1

Value Check Valve
Male:1/4"SAE Female:5/16"SAE 45°
Part# CV02

1/4" Access Valve

Emerson 3 Ton R22 Expansion Valve
Part# Aae3Hc

Connection
Style: S/T
Inlet: 1/2" ODF
Outlet: 5/8" ODF

Available Sizes: 3/8" - 1 18"
Solenoid Valve
Sweat On (ODF) 

Please select size from drop-down list: 

SAE Flare Solenoid Valve 

Normally closed
Wide choice of coils for a.c. and d.c. voltage
Suitable for R410A and R744
Designed for media temperatures up to 105 °C
Design pressure 45.2 barg
MOPD up to 38 bar / 550 psi with 20 W coil
Solder connection up to 1 5/8 in.Extended ends for soldering
It is not necessary to dismantle the valve
during soldering.

Available Sizes: 3/8" ; 1/2" ; 5/8"

Please select size from drop-down list below: 

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of applications can be covered.
Built-in pilot filter as standard, adjustable closing time and enclosures up to IP67 ensures optimal performance even under critical working conditions.

Available Sizes: 
ODF: 3/8" ; 1/2" ; 5/8"
Please select size from drop-down list below:  

Only NC type solenoid valve is available.
· The max. design temperature is 105℃.
· 100-mesh filter is contained at the suction end, which is replaceable.
· 10W high power solenoid and max. operating pressure differential
· (MOPD) is 2.5 MPa.
· It is applicable to various applications in freezer, cold store and air conditioning unit.
· The max. size of flare connection is 3/4 in.
· The max. size of welded connection is 9/8 in.
· The solenoids with various power supply are available.
· The clamped joint solenoid is easy to be mounted or dismounted only with one screwdriver.
· The sealed solenoid has a long service life and it can be used even in an adverse circumstance.

Available Sizes:
ODF: 1/4" - 1 1/8"
SAE:  1/4" - 1/2"

Please select size from drop-down list below: 

Ensures one flow direction and avoid reversal.
Comes with the built-in damper and can be mounted on the piping with pressure pulsation.
Prevents refrigerant back flow from high temperature evaporator to low temperature evaporator.
Applicable to the refrigeration unit in parallel with compressor.
Both direct flow type and right-angle types are available.

Available Sizes:
ODF: 1/4" - 1/3/8" 
SAE: 1/4" - 3/4"

Please select size from drop-down list below: