Danfoss Orifice for Thermostatic Expansion Valve
Part# 068-2007
Orifice Size: 04
Used with: T 2; TE 2.
Net Weight: 0.03 lb
Gross Weight: 0.04 lb
Dimensions:1.88 x 075"
Danfoss Orifice for Thermostatic Expansion Valve
Part# 068-2010
Orifice Size: 01
Used with: T 2; TE 2.
Net Weight: 0.03 lb
Gross Weight: 0.04 lb
Dimensions:1.88 x 075"
Danfoss Orifice for Thermostatic Expansion Valve
Part# 068-2003
Orifice Size: 00
Used with: T 2; TE 2.
Net Weight: 0.03 lb
Gross Weight: 0.04 lb
Dimensions:1.88 x 075"
Danfoss Orifice for Thermostatic Expansion Valve
Part# 068-2002
Orifice Size: 0X
Used with: T 2; TE 2.
Net Weight: 0.03 lb
Gross Weight: 0.04 lb
Dimensions:1.88 x 075"
Danfoss Compressor
Model: NF9FX
Horsepower: 1/5HP
Voltage: 115V
Phase: 1Ph
Frequency: 60Hz
Refrigerant: R134A
LBP/MBP
9066 POTENTIAL RELAY
90X Series potential relays meets all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
9065 POTENTIAL RELAY
90X Series potential relays meets all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
Supco 9064 POTENTIAL RELAY
90X Series potential relays meet all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry-standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
RSC20 UNIVERSAL POWER START RELAY
For servicing newer technology systems developed during the last decade. These relay and hard start combinations can also be used on systems without run capacitors.
Features/Benefits
- No additional wires required
- Prevents low voltage starting problems
- Provides a boost for hard start and unbalanced systems
- Replaces current-type relays
SUPCO RCO220 RELAY CAPACITOR OVERLOAD
220 to 240VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 7.5 Amps.
Features/Benefits
- Prevents low voltage starting problems
- Replaces relay, overload and provides a boost for hard start and unbalanced systems
- UL® Recognized
- Wire Designations - White/Start, Black/Common, Red/Run