Full Gauge
NTC sensor with thermoplastic polyester cable and individual isolation.
Digital Controller Accessories
The revolutionary Ranco® EasyProg enables storage of nine individual programs for Ranco Digital Controllers. It can copy the information from a standard controller and then download it to other controllers without the need for connecting it to a PC. Also, it can be connected to the PC through a USB port and the user can change the parameters using the Sitrad® Preset Editor. An RS-485 port and a Serial TTL port are used for communication with the Digital Controller.
* See the controller's manual to check if it is compatible with EasyProg before connecting them.
Full Gauge
The TCP-485-WIFI converter enables communication between Full Gauge Controls controllers and Sitrad through a WiFi data network using the standard TCP/IP communication. TCP-485 WiFi does not require Ethernet cabling to manage the installation.
Full Gauge
The TCP-485 serial device is used to transform the RS-485 standard to Ethernet signal (internet or intranet) thus allowing the controllers to communicate with Sitrad Pro software through wiring connection (RJ-45). It also allows connecting instruments remotely. Through the IP address of the TCP-485 Ethernet module, it is possible to access it wherever it is inside the company's network or on the internet.
Full Gauge
The CONV32 is used to connect to Sitrad Pro of up to 32 instruments with serial connection. It performs the communication between the controllers and the computer, by means of converting RS-485 signals from the controllers. The CONV32 is connected to the computer or Sitrad InBox by an USB cable.
Full Gauge
Full Gauge
The MT-530E-SUPER is a temperature controller with outputs for temperature control, humidity control, and auxiliary purposes, which may operate as a second stage for temperature control, humidity control, alarm, or cyclic timer. Used for low and medium relative humidity applications (10% to 85% with no condensation) and features an internal audible alarm (buzzer). Its temperature and humidity sensors are combined in a single bulb, saving space and wiring. Also includes an intelligent locking system to prevent unauthorized people from changing control parameters.
Full Gauge
Designed for cooling or heating application. MT-512E-LOG is equipped with 1 powerful 2HP relay, 1 temperature sensor, 1 digital input, data logger, cyclic time for natural defrost, IP65 frontal, min-max temperature record, sensor response time control, fast freezing mode, tamper-proof function, control functions shutdown, and RS485 serial communication port for Sitrad real-time monitoring and management.
Full Gauge
Periodical defrost may be performed with MT-512E-2HP by stopping the compressor (natural defrost) and forcing defrost manually. It is provided with a powerful 16A relay for actuating loads of up to 2HP, in addition to a command output combined with a timer for programming refrigeration and defrosting times. Another feature available is the turning off of the control functions, making the MT-512E-2HP operate only as a temperature indicator. It is also provided with a configurable digital filter, which has the purpose of simulating mass increase in the environment sensor, thus increasing its response time, i.e., it renders the sensor response slower (delay). Through an intelligent function blocking system, it prevents unauthorized personnel from changing the control parameters. MT-512E-2HP can also be set for heating.
Full Gauge
For frozen goods, the TC-900E-Log automates the defrosting process according to the needs of the facility (intelligent defrosting), providing energy savings. It operates with two sensors, one for room temperature and the other, fastened to the evaporator, that controls defrosting completion and fan restarting. The room temperature control has a normal setpoint and an economy setpoint, in addition to the fast freezing functionality and alarm functions indicating that the door is open. It features up to two digital inputs. One of these inputs may be configured as sensor 3* to monitor the condenser temperature and disconnect the control outputs in case of an alarm. It also features a digital filter, which is intended to simulate an increase of the mass of the room temperature sensor (S1), thus increasing its response time (thermal inertia), and avoiding unnecessary compressor activation. Its 16-Amp relay output can control compressors of up to 1 hp and the defrost output has a current capacity of 10 Amp.
TC-900E-Log contain an hourmeter to count the operating hours of the compressor, and an internal real time clock that enables the creation of a defrost schedule for each day of the week. Besides, with the help of an internal auxiliary power supply, the clock keeps working even in case of a power fault for at least 72 hours.