Refrigeration

Supco 9064 POTENTIAL RELAY

90X Series potential relays meet all requirements of OEM relays.

Features/Benefits

• Contact rating 35 amp @ 277 VAC
• Industry-standard part numbers used by most compressor and equipment manufacturers
• Non-positional
• Universal break-off mounting bracket
• WARNING: Prop 65 info

Supco 9063 POTENTIAL RELAY

90X Series potential relays meet all requirements of OEM relays.

Features/Benefits

• Contact rating 35 amp @ 277 VAC
• Industry-standard part numbers used by most compressor and equipment manufacturers
• Non-positional
• Universal break-off mounting bracket
• WARNING: Prop 65 info
•  

RSC20 UNIVERSAL POWER START RELAY

For servicing newer technology systems developed during the last decade. These relay and hard start combinations can also be used on systems without run capacitors.

Features/Benefits

• No additional wires required
• Prevents low voltage starting problems
• Provides a boost for hard start and unbalanced systems
• Replaces current-type relays
• WARNING: Prop 65 info
•  

SUPCO RCO220 RELAY CAPACITOR OVERLOAD

220 to 240VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 7.5 Amps.

Features/Benefits

• Prevents low voltage starting problems
• Replaces relay, overload and provides a boost for hard start and unbalanced systems
• UL® Recognized
• Wire Designations - White/Start, Black/Common, Red/Run
• WARNING: Prop 65 info
•  

• 

   

  URCO210 RELAY OVERLOAD CAPACITOR

  110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used on refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 13.3 Amps..

  Features/Benefits

  • Prevents low voltage starting problems
    For systems with or without run capacitors
    Designed for modern high efficiency compressors
    Helps older compressors start and run cooler
    Easy mount clip for quick installation
    Wire Designations - White/Start, Black/Common, Red/Run

WARNING: Prop 65 info

APR5--ADJUSTABLE POTENTIAL RELAY

Adjustable Potential Relay to "dial in" the exact pick-up voltage 30 Amp Contacts

Features/Benefits

• Adjustable electronic potential relay (EPR) technology
  Instant restart
  Motor power rating up to 5 hp
  Non-positional
  Normally closed 30 Amp contacts
  Safety time out 1.0 - 1.5 seconds
  Set pick-up voltage
  Start winding protection if motor does not start
  UL® recognized
  Voltage sensitive relay
  WARNING: Prop 65 info

Century Refrigeration Condenser Fan Motor

Part#: 3C003 

5.6" Diameter - 48 Frame

Permanent Split Capacitor (PSC); Capacitor Required: 7.5 Mfd-370 Volts (Not Supplied with Motor)

Thermally Protected

Totally Enclosed Air Over

Class B Insulation, 70°C Ambient

Ball Bearing

1/2" Diameter Shaft with Double Flat

48" Leads

Extended Clampbolts, Mounting Holes in shell, Belly Band Mount (Belly Band Not Included)

Century Refrigeration Condenser Fan Motor

Part#: 291

OEM Direct Replacement Motor

Unit Bearing

Shaded Pole

Thermally Protected

Totally Enclosed Air Over

Class A Insulation, 40°C Ambient

Bearing - Unit

5/16" Diameter Shaft with Flat

22" Leads with Quick Connect Terminalss

Tapped Double Boss, 3 Tapped Holes Opposite Shaft End

Century Refrigeration Condenser Fan Motor

Part#: 285

OEM Direct Replacement Motor

Unit Bearing

Shaded PoleShaded Pole

Thermally Protected

Totally Enclosed Air Over

Class A Insulation, 40°C Ambient

Bearing - Unit

5/16" Diameter Shaft with Flat

22" Leads

Tapped Double Boss, 3 Tapped Holes Opposite Shaft End

Century Refrigeration Condenser Fan Motor

Part#: 276

OEM Direct Replacement Motor

Unit Bearing

Shaded Pole

Thermally Protected

Totally Enclosed Air Over

Class A Insulation, 40°C Ambient

Bearing - Unit

5/16" Diameter Shaft with Flat

22" Leads

Tapped Double Boss, 3 Tapped Holes Opposite Shaft End