SPG1111GE 6HR 25MIN DEFROST TIMER WR9X330
Replacement Defrost Timers are designed to exact OEM features and specifications, for domestic refrigerators and freezers.
Features/Benefits
- CSA® Approved
- Domestic Refrigerators and freezers
- Exact OEM features and specifications
- Hardware Kit Included
- Metal Construction
- See Cross Reference tab for additional numbers
- UL® Recognized
RCO210 RELAY CAPACITOR OVERLOAD
110 to 125VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 13.3 Amps.
Features/Benefits
- Prevents low voltage starting problems
- Replaces relay, overload and provides a boost for hard start and unbalanced systems
- UL® Recognized
- Wire Designations - White/Start, Black/Common, Red/Run
URO81 UNIVERSAL RELAY OVERLOAD
For servicing newer technology systems developed during the last decade. These relays, overloads and hard start combinations can also be used on systems without run capacitors.
Features/Benefits
- Can be used with and without start capacitor
- Locked rotor protection eliminates start winding overheating
- Safe, reliable, long lasting PTC relay
URO41 UNIVERSAL RELAY OVERLOAD
For servicing newer technology systems developed during the last decade. These relays, overloads and hard start combinations can also be used on systems without run capacitors.
Features/Benefits
- Can be used with and without start capacitor
- Locked rotor protection eliminates start winding overheating
- Safe, reliable, long lasting PTC relay
9070 POTENTIAL RELAY
90X Series potential relays meets all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
9069 POTENTIAL RELAY
90X Series potential relays meets all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
9068 POTENTIAL RELAY
90X Series potential relays meets all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
9067 POTENTIAL RELAY
90X Series potential relays meets all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
SM999 UNIVERSAL MOTOR
Evaporator Fan Universal Motor Kit 120 Volt 3000 RPM, Single Speed CW -clockwise rotation OR CCW-counter clockwise rotation. Replaces over 450 different evaporator motor types, Break off 2" Motor Shaft with Breakaways at 1/2" and 1-1/2".
Features/Benefits
- Break off 2" motor shaft with breakaways at ½" and 1 ½"
- CSA® Approved
- Impedance protected
- Includes all mounting accessories and hardware
- Prefastened multi fit, break off mounting bracket
- Replaces over 450 different evaporator type motors
- Reversible rotation
- Shaft diameter ⅛"
- Single speed
- UL® Recognized
HS10004 LEAK LOCK
Highside® Leak Lock is a state-of-the-art high strength, pipe joint sealant consisting of chemically resistant film formers, plasticizers, reinforcing fillers and solvents, useable on all clean metal or plastic surfaces.
Features/Benefits
- 4 ounce brush top jar
- For use with pressures ranges from full vacuum to 10,000 PSI
- Ideal for joining metals, plastics and other materials
- Never hardens and never becomes brittle
- Non-toxic
- Sold 12 / Case
- Sticks to all clean surfaces