90X Series potential relays meet all requirements of OEM relays.
Features/Benefits
Contact rating 35 amp @ 277 VAC
Industry standard part numbers used by most compressor and equipment manufacturers
Non-positional
Universal break-off mounting bracket
WARNING: Prop 65 info
9065--POTENTIAL RELAY
90X Series potential relays meets all requirements of OEM relays.
Features/Benefits
Contact rating 35 amp @ 277 VAC
Industry standard part numbers used by most compressor and equipment manufacturers
Non-positional
Universal break-off mounting bracket
WARNING: Prop 65 info
Supco 9064 POTENTIAL RELAY
90X Series potential relays meet all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry-standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
- WARNING: Prop 65 info
Supco 9063 POTENTIAL RELAY
90X Series potential relays meet all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry-standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
- WARNING: Prop 65 info
RSC20 UNIVERSAL POWER START RELAY
For servicing newer technology systems developed during the last decade. These relay and hard start combinations can also be used on systems without run capacitors.
Features/Benefits
- No additional wires required
- Prevents low voltage starting problems
- Provides a boost for hard start and unbalanced systems
- Replaces current-type relays
- WARNING: Prop 65 info
SUPCO RCO220 RELAY CAPACITOR OVERLOAD
220 to 240VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 7.5 Amps.
Features/Benefits
- Prevents low voltage starting problems
- Replaces relay, overload and provides a boost for hard start and unbalanced systems
- UL® Recognized
- Wire Designations - White/Start, Black/Common, Red/Run
- WARNING: Prop 65 info
-
URCO210 RELAY OVERLOAD CAPACITOR
110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used on refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 13.3 Amps..
Features/Benefits
- Prevents low voltage starting problems
For systems with or without run capacitors
Designed for modern high efficiency compressors
Helps older compressors start and run cooler
Easy mount clip for quick installation
Wire Designations - White/Start, Black/Common, Red/Run
- Prevents low voltage starting problems
WARNING: Prop 65 info
APR5--ADJUSTABLE POTENTIAL RELAY
Adjustable Potential Relay to "dial in" the exact pick-up voltage 30 Amp Contacts
Features/Benefits
- Adjustable electronic potential relay (EPR) technology
Instant restart
Motor power rating up to 5 hp
Non-positional
Normally closed 30 Amp contacts
Safety time out 1.0 - 1.5 seconds
Set pick-up voltage
Start winding protection if motor does not start
UL® recognized
Voltage sensitive relay
WARNING: Prop 65 info
Full Gauge
The MT-512EL-2HP 12/24V features a single relay output, for cooling or heating purposes, combined to a cyclical timer for natural defrost. The natural defrost can be forced or performed through an off refrigeration cycle. It also features a configurable digital filter, which has the aim of simulating an increase of mass in the environment sensor, thus increasing its response time, that is, the sensor response becomes slower. In addition to those features, the MT-512EL-2HP 12/24V has tamper-proof function that blocks the keypad preventing unauthorized users changing its settings, and a control function shutdown that deactivates the controlling outputs turning the instrument into a digital temperature indicator.
Full Gauge
NTC sensor with thermoplastic polyester cable and individual isolation.