Supco 9063 POTENTIAL RELAY
90X Series potential relays meet all requirements of OEM relays.
Features/Benefits
- Contact rating 35 amp @ 277 VAC
- Industry-standard part numbers used by most compressor and equipment manufacturers
- Non-positional
- Universal break-off mounting bracket
- WARNING: Prop 65 info
RSC20 UNIVERSAL POWER START RELAY
For servicing newer technology systems developed during the last decade. These relay and hard start combinations can also be used on systems without run capacitors.
Features/Benefits
- No additional wires required
- Prevents low voltage starting problems
- Provides a boost for hard start and unbalanced systems
- Replaces current-type relays
- WARNING: Prop 65 info
SUPCO RCO220 RELAY CAPACITOR OVERLOAD
220 to 240VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 7.5 Amps.
Features/Benefits
- Prevents low voltage starting problems
- Replaces relay, overload and provides a boost for hard start and unbalanced systems
- UL® Recognized
- Wire Designations - White/Start, Black/Common, Red/Run
- WARNING: Prop 65 info
-
URCO210 RELAY OVERLOAD CAPACITOR
110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used on refrigeration systems with or without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 13.3 Amps..
Features/Benefits
- Prevents low voltage starting problems
For systems with or without run capacitors
Designed for modern high efficiency compressors
Helps older compressors start and run cooler
Easy mount clip for quick installation
Wire Designations - White/Start, Black/Common, Red/Run
- Prevents low voltage starting problems
WARNING: Prop 65 info
APR5--ADJUSTABLE POTENTIAL RELAY
Adjustable Potential Relay to "dial in" the exact pick-up voltage 30 Amp Contacts
Features/Benefits
- Adjustable electronic potential relay (EPR) technology
Instant restart
Motor power rating up to 5 hp
Non-positional
Normally closed 30 Amp contacts
Safety time out 1.0 - 1.5 seconds
Set pick-up voltage
Start winding protection if motor does not start
UL® recognized
Voltage sensitive relay
WARNING: Prop 65 info
Danfoss Thermostatic Expansion Valve 068U2207
TUAE, R134a/R513A
Temperature range [°C]: -40 - 10,
Pressure equalization: Externally equalized
Danfoss Thermostatic Expansion Valve 068Z3403
TE 2, R404A/R507A
Temperature range [°F]: -40 - 50,
Pressure equalization: Externally equalized
Gross/Packaged Weight: 1lb
Package Dimensions: 3" x 3" x 4"
Danfoss Service Thermostat 077B7002
Danfoss Service thermostat; with accessories,
Product Type: B4
Type designation: Service thermostat; with accessories,
Used for product: Refrigerators; with manual defrost,
Warm cut-in [°C]: 0.0,
Warm cut-out [°C]: -7.5,
Cold cut-out [°C]: -22.0,
Cold cut-out [°C]: -22.0,
Capillary tube length [mm]: 1300
DANFOSS MT/MTZ START RELAY
PART# 8173024
COIL: 495V 60hZ
35AMP - 277VAC
38-S112C4999
